Do you suspect a   leak in your pool,   spa or fountain? 

Use the following steps to confirm a leak:

Ensure that the swimming pool is filled to normal operating level.

1

Dip a 5-gallon bucket in the swimming pool (or water you have) and fill it an inch or two higher than the pool water level on the outside of the bucket.

2

Place the bucket on the steps of the swimming pool. Do not immerse.

3

4

Shut the pumps off and ensure that the auto-fill valve is off to set up the test.

Mark the water levels inside & outside the bucket with a grease pencil.

5

Restore the pump function (keep the auto fill valve off).

6

Mark the time. After 24 hours compare the two levels of water. If the mark outside the bucket (swimming pool water) is lower than the mark inside the bucket, this is an indication that there is a leak.

Did you confirm your leak? Time to call the experts at Aquaman Leak Detection. We service all of Florida with decades of experience.

Click Here